Stratus Pulse Logger
The Stratus Pulse logger is a robust, low cost and sophisticated 3G GSM logger with a wide range of input functions. This logger can operate on an external 12V supply or make use of standard alkaline batteries. It is well suited for applications such as those needed in the utilities industry or other remote measurement systems.
Built for the field, managed from your desk
The Stratus Pulse Logger has been designed to allow for easy installation and setup without the need for a complicated infrastructure. Setup and management is carried out using the standard CloudWorks Console software.
What the Stratus Pulse does
-
Uses GPRS/EDGE/3G GSM (UMTS/HSPA) technology.
-
Bluetooth interface — setup and manual data collection can be achieved through the Bluetooth interface negating the need for cables that invariably fail during continuous use.
-
Battery or external 12V power with battery failover in dual mode.
-
Uses 3x standard D Cell alkaline batteries that can last in excess of 5 years under normal usage. Many other loggers use lithium batteries that are expensive and difficult to obtain. Other problems involving lithium batteries are the restrictions when shipping using airfreight. All lithium batteries need to be shipped as hazardous cargo that is becoming increasingly difficult to achieve as many airlines are no longer allowing these batteries on their aircraft.
-
ECO Interface for the connecting to GWF electronic meters.
-
2 x Pulse inputs — Pulse inputs are used on metering devices that supply a pulse output for a measured amount of product.
-
Large onboard non-volatile memory — This logger can record up to 14400 records (application specific) for later download.
-
Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and transmitted at programmable intervals.
-
Remote programming of all setup parameters via GSM link or SMS.
-
Ideal for leak detection, alarming and water shut-off control to prevent water loss.
-
Onboard Bluetooth can stream diagnostic information about signal strength, network status etc.
-
Touch sensitive button and LED's for manual wakeup to server and diagnostic purposes are accessable on the outside without the need for opening the housing.
-
Available with the standard internal antenna or a connector (SMA) for an external antenna. Note that the external connector will affect the IP rating.
Technical detail
- GPRS/EDGE/3G technology
- UMTS Dual-band: 900/2100MHz
- GSM Dual-band: 900/1800MHz
- Bluetooth interface
- Powered by battery or external 12V supply
- Option of external power with battery failover and sleep
- All management software supplied free
- Standard Alkaline Batteries - 3 x D cells (5+ years under normal conditions)
- ECO Interface for the connecting to GWF electronic meters
- 2 x Pulse inputs
- Up to 14400 record datalog memory (application dependent)
- Rugged housing with seal eye
- Touch sensitive button and LED Diagnostics
- Configuration and diagnostics through Bluetooth interface
- Fully configurable remotely
- Stream data in real-time when powered by external supply
- Size 185mm x 130mm x 55mm (including cable glands)
- Housing Protection Class
Internal Antenna (standard) : IP68 - Max 1.2m, 30 days
External Antenna Connector : IP65 - Environment : -20°C to 80°C humidity ≤ 90% non condensing. Check battery specifications for low power systems
- Logging intervals 1 minute to 1 month
Full electrical, mechanical and environmental data is published in the CDS549 specification sheet and the user manual. Every model on this site is listed in the comparison chart.
Ready to roll out Stratus Pulse loggers?
Download the CloudWorks Installer to set up CloudWorks Console and CloudWorks Integration, or contact us for pricing and availability.